The Alex Duetto Izzo Espresso Machine has been known for years amongst coffee enthusiasts as the leader in dual boiler espresso machines. Now, the Alex Duetto IV espresso machine by Izzo has gone even further into the forefront with a score of great new features that make this machine easier to use while producing the same great tasting espressos and cappuccinos the brand is known for.

New Features on the IV Plus:

• The cup clearance has been increased to allow the use of Mug cups
• The height of the drip-tray has been reduced
• The distance between the steam/hot water wands and the front panel has been increased through the use of sleeves to avoid scratches on the chassis
• Dual boiler with new easy emptying system 
• New PID with shot timer 
• Silent rotary pump adjustable without disassembling the machine 
• Easy access to the heating elements 
• Magnets for easy positioning of the drip-tray 
• Automatic water loading Mushroom, gigleur & top nut in stainless steel 
• Coibented boilers for energy saving

Functions controlled by the PID:

• Controls the temperature in the group boiler AND the steam boiler. (No Pressure stat)
• Easily changes the machines operational mode from 15 amps to 20 amps.
• Temperature display easily changed from Fahrenheit to Celsius.
• Can program the offset settings for both boilers.
• Either boiler can be turned off. (save energy and turn the steam boiler off if you only want espresso)
  Note: You can also turn the steam boiler on and off with a switch on the side of the machine.

Features

• Inversion of the motor position: The Motor has been installed over the pump
• Smaller drip tray for more cup clearance
• Pump adjustable from outside, adjust the pump without disassembling the machine
• New Motor mounts reduces vibration for quieter performance
• NEW PID with shot timer integrated
• Boilers with drain plugs, convenient if you need to ship your machine or descale it
• Mushroom in stainless steel
• Internal Gicler in stainless steel
• Heating elements access, change heating elements without disassembling the machine
• Group has been raised for additional clearance allowing use of taller cups
• Magnets behind drip tray to hold it more securely in place
• Smaller, recessed heater lights
• Cup warmer tray with rails, makes it easy to lift off even with cups on top
• Reinforce front to reduce flexing
• Discharge into drip tray goes down instead of forward, silicone tube no longer visible
• Easy access expansion valve
• Lever action, E 61 commercial group with automatic pre-infusion
• No-Burn articulating steam arm
• No-Burn articulating hot water arm
• All stainless construction (including the frame)
• Dual boilers
• PID controller for the group boiler (with 1.0 degree Fahrenheit adjustment)
• PID controller also controls the steam boiler temperature (and thus pressure)
• Extremely quiet rotary pump
• Quiet and more reliable SSR Power Relay
• Water tank 2.4 liter with low water sensor (cuts power to heater)
• Lever control to allow switching water source from direct plumb to water tank
• Low water sensor in the reservoir
• Red indicator lights clearly marked so you can tell which boiler is receiving power
• Rubber insulating boots over heating element ends for safety
• 15 or 20 amperage operational mode
• 5.90" clearance between the drip tray and the portafilter / 3.75" from bottom of spouted portafilter to drip tray

Included in the box:

• 3 Additional style steam tips (2- 4 hole, 1- 2 hole, 1- 3 hole)
• Stainless steel base 58mm tamper
• Double precision insert basket
• Optional drain kit
• Ergonomic 58 millimetre portafilters: one single and one double portafilter, Stainless steel blank disk for back flushing