Baratza Sette 30 Grind Adjustment Assembly - S070 // SP0100792

Replacement grind adjustment assembly for the Sette 30. The adjustment ring moves from a coarse setting (31) to a fine setting (1). With the grinder running, turn the knob to the right to move from coarse to fine. For espresso, start at 3. For manual brew, start at 20.

Replacement Instructions:

Removing the Bean Hopper:

1. Rotate the bean shutoff knob to the CLOSED position, then press the START button to purge any remaining beans. 
2. Remove the power plug from the power outlet. 
3. Remove the hopper by rotating it counterclockwise until it stops, and then lift the bean hopper off of the grinder housing.

Removing the Cone Burr/Grind Adjustment Assembly:

1. Rotate the bean shutoff knob so it is in the CLOSED position, then press the START button to run any remaining beans through the grinder (fig. C). 
2. Once the grinder has been fully purged, rotate the grind adjustment assembly beyond the coarsest setting to the install/remove indicator (blue triangle). The assembly will release downward for removal (fig. E)

Reinstalling the Cone Burr/Grind Adjustment Assembly:

1. Align the blue installation/removal indicator on the grind adjustment assembly with the blue installation/ removal indicator on the right side of the machine (fig E). 
2. Keeping the two blue indicators aligned, gently press up on the grind adjustment assembly and rotate the black cone burr holder (fig F) until the tabs and notches line up and the cone burr holder slides up into the machine. At this point the cone burr and holder will be inserted into the machine and no longer visible (fig G). For a video tutorial, watch our video on youtube . 
3. While applying upward pressure, rotate the grind adjustment assembly as shown (fig G) rotating the blue tab towards the rear of the grinder. The adjustment assembly will click as it properly engages and the black macro adjustment will be aligned with the 1-31 scale on the machine.